Exist
 

Bio-Bully™ - 50 LB Keg

Concentrated Dry Microbiocide
Item #115933

Bio-Bully™ - 50 LB Keg

Concentrated Dry Microbiocide
Item #115933

Need Assistance? Call us 833-699-7864

  • Bromine-based formula is more effective than bleach in typical cooling system pH levels
  • Fast-dissolving granules deliver bacterial control instantly
  • Microorganisms will not build up resistance to Bio-Bully because of its strong oxidizing properties

Product Description

  • Bio-Bully™ is a powdered bromine-based halogen microbiocide. Bio-Bully is more effective at typical cooling system pH levels, delivering more killing punch than simple chlorinated products like bleach. Bio-Bully is fast-dissolving to deliver the maximum control instantly when added to the system water. As a strong oxidizing microbiocide, microorganisms do not build up a resistance to Bio-Bully. Bio-Bully is a key component of any cooling system Legionella control program.

    APPLICATIONS
  • Air Washer Systems
  • Commercial/Industrial Water Cooling Systems
  • Evaporative Condenser Water Systems
  • Ornamental Ponds

    Bio-Bully is EPA registered - Reg. No. 935-71-70799

Directions for Use

Bio-Bully™is intended for use in the following: Air Washer Systems, Commercial/Industrial Water Cooling Systems, Evaporative Condenser Water Systems, Ornamental Ponds and Aquaria, Heat Exchange Water Systems, Industrial Scrubbing Systems, Industrial Auxiliary Water Systems, Industrial Process Water, Industrial Waste Disposal Systems, Pasteurizer/Warmer/Cannery Cooling Water Systems. Add Bio-Bully to the system by direct placement into the water at a point where the product will be uniformly mixed with the water. The frequency of feed and duration of treatment will depend on the severity of the contamination. Badly fouled systems must be cleaned before treatment begins. Initial dose: When system is noticeably fouled, add Bio-Bully at a rate of 0.03 to 0.75 pounds per 1,000 gallons (3.6 to 90 grams per 1000 liters), to achieve 0.2 - 10 mg/L total available halogen as chlorine. Subsequent Dose: When microbial control is evident, add Bio-Bully at a rate of 0.03 to 0.15 pounds per 1,000 gallons (3.6 to 18 grams per 1000 liters) in the system to achieve 0.2 to 5 mg/L total available halogen as chlorine. Repeat periodically as needed to maintain control. Not for use in potable water. Not for use in ornamental ponds containing fish and other wildlife.


Need Assistance? Call us 833-699-7864

State is an Extension of Your Team

Our customers of all sizes benefit from the best facility management products.

Team
Customized Solutions
Team
Professional Service
Team
Proven Results