SuperHot™ Complete NST - 55 GL drum

All-in-One Boiler Treatment
Item #124437

SuperHot™ Complete NST - 55 GL drum

All-in-One Boiler Treatment
Item #124437

Need Assistance? Call us 1-800-321-8180

  • Unique, high temperature, non-consumable, film-forming corrosion inhibitor
  • Excellent corrosion protection, regardless of oxygen level entering the boiler
  • Also protects boiler during late fall and early spring when boilers are off-line for long periods

Product Description

SuperHot™ Complete NST is a boiler protection system that includes both corrosion and scale control. Its unique formula is ideal for those that prefer to not treat their steam/condensate system or prefer to feed a separate product as it does not contain steam line protection ingredients. For steam line protection, we recommend the addition of SuperHot Steam Treatment.

Oxygen pitting is one of the most devastating actions that can occur in steam boilers. Once corrosion starts to occur, it is difficult to stop and will eventually result in costly downtime and repair.

Traditionally, oxygen pitting is controlled using an oxygen scavenger, such as sodium sulfite, to chemically remove dissolved oxygen. In the past, this approach has always worked well since boilers maintain system pressure continuously. Today, however, boilers are not operated in the same way. Energy concerns have forced operations to cycle boilers “on/off”; this style of operation allows dissolved oxygen to enter the boilers. These high levels of dissolved oxygen can quickly deplete any residual sulfite, leaving the boiler vulnerable to oxygen attack.

In addition to providing effective scale control, SuperHot NST utilizes a unique high-temperature, non-consumable film-forming corrosion inhibitor system. This system provides excellent protection against corrosion, regardless of the level of oxygen entering the boiler.

SuperHot NST is much easier to control and maintain than the conventional sulfite-based scale and corrosion inhibitors. SuperHot Complete will also protect the boiler during the late fall and early spring when low loads cause the boilers to be off-line for long periods of time.

SuperHot NST is NSF certified for treating boilers, steamers and cooling systems (G7) where neither the treated water or steam come into contact with edible products in and around food processing areas.

Directions for Use

SuperHot™ Complete NST should be added to the feed water tank or condensate receiver directly from the shipping container. No product dilution or mixing is required. Feed SuperHot NST to the feed water at a rate of 2 - 2.5 gallons per 1000 gallons of blowdown water. Maintain Sodium Molybdate at 80 - 160 ppm. Perform bottom blowdown at specified periods to remove solids accumulation. System TDS levels are determined by the quality of the fresh water makeup available. Generally TDS levels should be maintained below 3000 ppm. Your State Chemical Solutions representative will review the water conditions for the boiler systems and recommend a TDS limit for your system.

Product Downloads & SDS

Need Assistance? Call us 1-800-321-8180

State is an Extension of Your Team

Our customers of all sizes benefit from the best facility management products.

Team

Customized Solutions

Team

Professional Service

Team

Proven Results