SL-105

Boiler Water Treatment

Item #C22056

SL-105

Boiler Water Treatment

Item #C22056

Options:

Need Assistance? Call us 1-800-321-8180

Favorite Share

Prevents Condensate System Corrosion
Maximizes Equipment Life
Prevents Condensate Leaks
No Mixing Required

Product Description

SL-105 is a concentrated steam-condensate line treatment that effectively neutralizes carbonic acid that forms when steam condenses to water in the condensate lines. Untreated steam can result in deterioration of condensate lines, eventually ending in leaks and valuable condensate loss. The neutralizing amine in SL-105 provides maximum protection at all operating pressures. SL-105 provides maximum coverage for the entire steam-line system. SL-105 protects your steam/condensate system investment.

Directions for Use

NOTE: SL-105 Steam Treatment should be maintained in steam at a level no greater than 10 ppm Cyclohexylamine, 10 ppm Morpholine or Total free amine level of 25 ppm. Add the recommended amount of SL-105 to the condensate make-up tank. Do not use when steam is to contact milk or milk products.
INITIAL TREATMENT: Use 7 ounces (206 ml) for every 1000 gallons (3800L) of make-up water added to the boiler. Check condensate to make sure pH is alkaline at all times. Obtain a sample of steam condensate 24 hours after the addition of SL-105 Treatment from the steam trap located furthest from the boiler. Drain steam trap for a minimum of 30 seconds prior to collecting sample.
Cool sample at room temperature and determine pH. If pH of steam condensate is low, 7.0 or less, increase treatment until pH in the steam condensate is 8.0 – 9.0. Check and maintain pH of steam condensate in 7.0-8.0 range by addition of SL-105 Treatment at regular intervals.