WTS®

Protect areas not to be sprayed with masking tape or paper. Cover the area under the tile with a drop cloth. Continue to shake can occasionally while spraying. For installed ceiling tiles, hold can vertically and point top of spray button toward tile surface. Hold can 12 to 15 inches from tile. When spraying, ensure fresh air entry or wear NIOSH/MSHA respiratory protection, eye protection and protective clothing. For ceiling tiles removed from ceiling, prop tiles up on from tile. Apply first coat by using short light bursts. Apply thin coats until stains is completely covered. Allow a minute or two drying time between each coat. After spraying, turn can upside down and depress nozzle for several seconds to clean out any spray left in the nozzle.