Defender™ II

Shake and stir well before using. Apply only when temperatures are between 60-100° F. On Rusted Metal: Defender™ II is a metal primer, not a paint. You do not need to remove rust; simply remove old loose paint. For best results clean surface with a product such as State 999® and rinse with clean water. Apply Defender II undiluted with a brush. Allow to dry overnight. Apply a second coat of Defender II or a top coat of paint. Where rust is exceedingly heavy, two coats of Defender II may be needed to thoroughly penetrate and properly coat the surface. For outdoor performance and maximum indoor performance, a top coat of paint should be applied. Allow 24 hours drying time before applying top coat. Clean brushes with water. Avoid spreading on adjacent areas. If splashing occurs, rinse with water. On New Metals: For new ferrous, aluminum or galvanized surfaces, two coats of Defender II are required. Follow the directions above for proper application procedure. Paint can be applied as a finish coat on top of Defender II. Be sure to allow proper drying time between coats. NOTE: Not for use on surfaces which are continuously submerged in water.