State® Electronics Cleaner RTU Spray

Follow device manufacturer recommendations when cleaning electronics. To clean electronics, spray State Electronics Cleaner RTU on a clean cloth, preferably microfiber, then wipe onto surface. Do not spray State Electronics Cleaner RTU directly onto electronics. State Electronics Cleaner RTU is compatible with the State Custom Wipes. When making as a wipe, make sure to wear all proper Personal Protective Equipment (PPE) before and during handling, and wash hands after handling. FOR ONE GALLON CANISTER Remove the lid of the State Custom Wipes canister. Place a roll of wipes in the canister. Wearing proper PPE, pour one full quart of product evenly over the top of the wipes. Once poured, reach inside the canister to the middle of the roll of wipes through the hole in the center of the lid. Press the flap down firmly to close. FOR SMALL CANISTER Remove the lid of the State Custom Wipes canister. Place a roll of wipes in the canister. Wearing proper PPE, pour 1/3 of a quart of product evenly over the top of the wipes. Once poured, reach inside the canister to the middle of the roll of wipes through the hole in the center of the lid. Press the flap down firmly to close.