Oran-Gel®

Add COOL (not hot or warm) water to Oran-Gel®. Do not add Oran-Gel to water. Add HALF the required water and shake or stir well. Add the other half of the water and shake or stir again. Spray from a compression sprayer or, for small areas, from a Trigger Sprayer. Dilute 1:20 with cool water. Spray engine surface and allow approximately 15 minutes for the gel to work. Rinse with water. (High pressure flush will help remove residue.) For extreme soil, scrub surface with a stiff bristle brush and then rinse. When temperature is below 40°F, allow 1-3 hours of gel contact time. Spray Oran-Gel on a warm (not hot) engine. Do not spray while engine is running. As a Soak Degreaser, immerse engine parts to be cleaned in the solution until grease is loosened. Rinse thoroughly. NOTE: Powerful organic compound and may harm some plastic or painted surfaces. Test first before applying. Avoid food contamination during storage and use. For use on non-food contact surfaces only.