BT-75™

DIRECTIONS FOR USE IN STEAM BOILERS:

For best results BT-75 should be used with softened water. Use a
sufficient amount of BT-75 to achieve sulfite level of 30–60 ppm
in the steam boiler. Typically, BT-75 is initially fed at a rate of 500
ml per 1000 liters of boiler water. Product should be added to the
feed water tank or condensate receiver directly from the shipping
container. No product mixing or dilution needed. If the above
product test is below range, increase product usage.
Perform bottom blowdown at specified periods to remove
accumulated solids. System TDS levels are determined by the quality
of the available fresh make-up water. Your State Account Manager
will review the water conditions of the boiler system and recommend
a TDS limit for your system. BT-75 should be added with a pump and
controller similar to the State Chemical boiler controller.
For steam systems with condensate return, the addition of a
condensate return product such as SuperHot™ Boiler Treatment
should be used. For boiler systems with feed water temperatures
below 212° F should use a separate oxygen scavenger boost product
such as State Chemical Liquid Oxygen Scavenger.
Review the label and SDS on stateindustrial.com for all product
directions, precautions and first aid information.

Brochures

• BT-75_LT_EN

Safety Data Sheets

See Safety Data Sheets