PREPARATION OF DISINFECTANT USE-SOLUTION: Add 3 oz. per gallon of water for 250-ppm water hardness

DISINFECTION DIRECTIONS: Apply use-solution with a cloth, mop, sponge, or sprayer or by soaking until surfaces are thoroughly wet. Treated surfaces must remain wet for 10 minutes. Wipe dry with a clean cloth or sponge or let air dry. For sprayer applications, use a coarse spray device. Spray with quick full strokes 6 - 8 inches from surface. Rub with a brush, sponge or cloth. Do not breathe spray. After use, close nozzle. For heavily soiled areas, a preliminary cleaning is required. Prepare a fresh solution daily or more often if use solution becomes diluted or soiled. Use fresh product daily or more often if product becomes diluted or soiled. Rinse all surfaces that come in contact with food such as countertops, appliances, tables and stovetops with potable water before reuse.
This product is not for use on medical device surfaces.

VIRUCIDAL DIRECTIONS: Follow Disinfection Directions. Treated surfaces must remain wet for 1 minute. Allow surfaces to air dry. This product is not for use on medical device surfaces.

MOLD AND MILDEW CONTROL DIRECTIONS: Add 3 - 4 oz. per gallon of water, to inhibit the growth of mold and mildew and their odors on hard, nonporous surfaces. Thoroughly wet all treated surfaces completely. Let air dry. Repeat application weekly or when growth or odor reappears.

TO CLEAN AND DEODORIZE: Use 1:43 dilution. Apply product to wet the surface[s] thoroughly. Let stand for at least one minute, rinse with water or allow to air dry.

DIRECTIONS FOR SANITIZING NON-FOOD CONTACT SURFACES: DBC-34 is a sanitizer for hard nonporous non-food contact surfaces at ¾ oz. per gallon of water dilution against Klebsiella pneumoniae and Staphylococcus aureus. Treated surfaces must remain wet for 60 seconds. Wipe dry with a clean cloth or sponge or allow to air dry.

Special Instructions for Cleaning and Decontamination against HIV-1 on Surfaces / Objects Soiled With Blood / Body Fluids.
Personal Protection: Clean up must always be done wearing protective gloves, gowns, masks and eye protection.
Cleaning Procedure: Blood and other body fluids containing HIV must be thoroughly cleaned from surfaces and objects before application of DBC-34.
Contact Time: Leave surface wet for 1 minute. Use a 10-minute contact time for disinfection against all other bacteria claimed.
Disposal of Infectious Materials: Blood, body fluids, cleaning materials and clothing must be autoclaved and disposed of according to local regulations for infectious waste disposal.

TOILET BOWL / URINAL DISINFECTANT AND CLEANER DIRECTIONS:
Remove gross filth before disinfection. From concentrate: Add 3 – 4 oz. to the toilet bowl or urinal and mix. Thoroughly brush or swab over exposed surfaces and under the rim with a cloth, mop, brush or sponge. Allow to stand for 10 minutes and flush.