Coil Doctor™ - Case of 12 aerosols

Aerosol Evaporator Coil Cleaner and Disinfectant (On EPA List N For use against the virus that causes COVID-19)
Item #121640

Coil Doctor™ - Case of 12 aerosols

Aerosol Evaporator Coil Cleaner and Disinfectant (On EPA List N For use against the virus that causes COVID-19)
Item #121640

Need Assistance? Call us 1-800-321-8180

  • Powerful cleaner foams and penetrates into coils to remove dirt and build-up restoring unit efficiency
  • Disinfectant formula is effective against Legionnaires’ Disease
  • No scrubbing or rinsing necessary, allowing the unit to be returned to service quickly

Product Description

  • Coil Doctor (EPA Registration #44446-23-70799) has demonstrated effectiveness against viruses similar to SARS-CoV-2 on hard, non-porous surfaces. Therefore, Coil Doctor can be used against SARS-CoV-2 when used in accordance with the directions for use against canine parvovirus on hard, non-porous surfaces. Please refer to the CDC at https://www.cdc.gov/ for more information.

    Coil Doctor™ is a powerful cleaner and disinfectant for air conditioning systems. The specialized formulation of surfactants easily penetrates dirt for easy removal while the disinfectant kills bacteria commonly found on air conditioning coils.

    To keep air conditioning units running clean and efficiently, use Coil Doctor during routine maintenance and inspection of the system. Coil Doctor is specially formulated to remove heavy dirt and debris that commonly rob the efficiency of air conditioning systems. Its delayed foaming action allows the powerful jet spray to penetrate deeper into coils and then foam. This delayed action increases the cleaning action of Coil Doctor. As the foam expands it removes dirt and pushes it outward for removal. After cleaning, simply wipe off excess residual foam on the outside of the coils and return the unit to service.

    APPLICATIONS
  • Restores air conditioning efficiency
  • Reduces foul odors
  • Controls bacteria and disinfects air conditioner coils
  • Effective against Legionnaires’ Disease
  • No scrubbing necessary

Directions for Use

DISINFECTION
To disinfect hard non-porous surfaces (such as HVAC catchpans and air conditioning evaporator coils), proceed as indicated: (1) Shake can before using. (2) Hold six to eight inches from surface to be treated. (3) Spray area until it is covered with a white foam. Allow foam to penetrate and remain wet for 10 minutes. No scrubbing necessary. (4) Wipe off with a clean cloth, mop or sponge. This product will not leave grit or soap scum. For heavily soiled areas, remove gross soil before treatment.

MILDEWSTAT
To control mold and mildew on pre-cleaned, hard, non-porous surfaces (such as floors, walls, table tops) spray surfaces to be treated, making sure to wet completely. Let air dry. Repeat application at weekly intervals or when mildew growth reappears.

Product Downloads & SDS

Need Assistance? Call us 1-800-321-8180

State is an Extension of Your Team

Our customers of all sizes benefit from the best facility management products.

Team

Customized Solutions

Team

Professional Service

Team

Proven Results