Bio-Bully™is intended for use in the following: Air Washer Systems, Commercial/Industrial Water Cooling Systems, Evaporative Condenser Water Systems, Ornamental Ponds and Aquaria, Heat Exchange Water Systems, Industrial Scrubbing Systems, Industrial Auxiliary Water Systems, Industrial Process Water, Industrial Waste Disposal Systems, Pasteurizer/Warmer/Cannery Cooling Water Systems. Add Bio-Bully to the system by direct placement into the water at a point where the product will be uniformly mixed with the water. The frequency of feed and duration of treatment will depend on the severity of the contamination. Badly fouled systems must be cleaned before treatment begins. Initial dose: When system is noticeably fouled, add Bio-Bully at a rate of 0.03 to 0.75 pounds per 1,000 gallons (3.6 to 90 grams per 1000 liters), to achieve 0.2 - 10 mg/L total available halogen as chlorine. Subsequent Dose: When microbial control is evident, add Bio-Bully at a rate of 0.03 to 0.15 pounds per 1,000 gallons (3.6 to 18 grams per 1000 liters) in the system to achieve 0.2 to 5 mg/L total available halogen as chlorine. Repeat periodically as needed to maintain control. Not for use in potable water. Not for use in ornamental ponds containing fish and other wildlife.