Mighty Sparkle™ Diamond Pro 18
Durable, Low-Maintenance Floor Finish
Low Maintenance Floor Finish with High Initial Gloss
Mighty Sparkle™ Diamond Pro 18 eliminates routine burnishing cycles while delivering a high-gloss, scuff-resistant finish that stands up to daily commercial traffic. Its 18% solids formulation creates a durable acrylic polymer film that resists black heel marks, water spots, and dulling. The self-sealing formula eliminates a separate sealer application on most floors, reducing labor and product costs, while the low-odor finish can be applied during business hours.
Where to Use Mighty Sparkle™ Diamond Pro 18
Use On: VCT, LVT, linoleum, terrazzo, sealed concrete, and existing acrylic or cross-linked polymer floor finishes.
Recommended For: Offices, schools, healthcare facilities, government buildings, and commercial properties.
Effective Against: Scuff marks, black heel marks, water spotting, and appearance loss caused by daily traffic.
- Only for use indoors. Do not apply if floor temperature is less than 55°F.
- Strip floor using one of State’s strippers according to label directions.
- Apply 3-5 thin coats using a clean applicator. If a higher gloss is desired, apply additional coats. Allow 45-60 minutes drying time between coats.
Note: This product is a self-sealing finish. However, if tile is old, worn, or porous, initially applying 1-2 coats of State’s Sealer will enhance gloss and long-term performance.
Coverage: 2,000 – 3,000 square feet per gallon depending on application method and porosity of floor.
Maintenance
Mighty Sparkle™ Diamond Pro 18 is a low-maintenance floor finish that does not need to be buffed or burnished. However, to enhance and restore appearance of finish, low-speed buffing and high-speed burnishing equipment can be used.
- Dust mop or sweep floor.
- Clean floor using one of State’s neutral floor cleaners according to label directions.
- If low-speed buffing is desired, use one of State’s floor restorer or spray buff products according to label instructions as well as the appropriate floor machine pad.
- If high-speed burnishing is desired, use one of State’s floor restorer products according to label instructions as well as the appropriate floor machine pad.
Interim Maintenance
Mighty Sparkle™ Diamond Pro 18 can be applied as a top coat finish to existing acrylic, cross-linked polymer finishes, which includes all other State floor finishes. To perform a scrub and re-coat, use the following procedure:
- Dust mop or sweep.
- Deep scrub using one of State’s deep scrub cleaners.
- Using a clean applicator, apply 1-2 coats of Diamond Pro 18 floor finish.
Brochures
Safety Data Sheets
Request a Quote
Looking for more details or a quote on our products? Fill out the form to connect with our team. We’ll provide what you need to help you choose the right solution for your facility.
For details on how we handle your information, visit our Privacy Policy.