Concrete Patch™
Quick-Setting, All-Weather Concrete
Fast-Setting Concrete Patch for All-Weather Repairs
Concrete Patch™ minimizes downtime by repairing damaged concrete in as little as 15 minutes, allowing foot traffic after one hour and vehicle traffic after two under normal conditions. Unlike ordinary concrete that can require a full day to cure, its all-weather formula performs in damp or humid conditions, helping maintenance teams complete repairs faster and keep facilities operating.
Where to Use Concrete Patch™
Use In/On: Bridges, sidewalks, driveways, loading docks, ramps, warehouse floors, industrial facilities, parking lots, curbs, and concrete steps.
Recommended For: Municipal maintenance departments, contractors, schools, hospitals, warehouses, manufacturing facilities, commercial properties, and public works crews.
Effective Against: Cracks, spalled concrete, deteriorated edges, potholes, trip hazards, freeze-thaw damage, and surface deterioration.
SURFACE PREPARATION
Start with a firm base. For minor cracks, chip out enough area to give a minimum of 1/2” thickness. Any oil soaked concrete must be removed. Always dampen surfaces with water before application. Remove all standing water. Bonding surface must be free of any coatings, points, seamless, or cursing compounds.
MIXING
Mix only what you can use in 10 minutes. Use a clean mortar box and hoe or mortar type (paddle) mixer for larger jobs; for smaller jobs use a bucket and a trowel. Mix 15 parts Concrete Patch™ to 1 part water. Add additional water to bring to desired consistency. Excess water reduces strength. Use 3.5 pints water with 50 pounds of Concrete Patch. Always add Concrete Patch to the water, and mix thoroughly for 3 minutes. Apply immediately. The setting speed is dependent upon the temperature of the mix. For quick setting use hot water.
APPLICATION
Scoop mixture into repair area and trowel quickly. Work material well into base to assure a good bond. Do not overwork or overtrowel. Concrete Patch has self-leveling properties. Do not attempt to re-dampen. Not designed to be feather-edged.
FOR DEEP HOLES
A clean, uniform 3/8” aggregate may be added at the rate of 25 pounds per 50 pound container. To use: 1) Add water. 2) Add aggregate. 3) Add powder. When using a sharp granular aggregate reduce the amount added to obtain proper workability.
Request a Quote
Looking for more details or a quote on our products? Fill out the form to connect with our team. We’ll provide what you need to help you choose the right solution for your facility.
For details on how we handle your information, visit our Privacy Policy.