Oran-Gel® - 55 GL drum

Citrus Industrial Degreaser

Item #22190

Oran-Gel® - 55 GL drum

Citrus Industrial Degreaser

Item #22190

Options:

Need Assistance? Call us 1-800-321-8180

Favorite Share

Citrus oil formula to degrease engines and industrial equipment
Gel formula allows longer contact time
Clinging makes it perfect for vertical surfaces

Product Description

Oran-Gel® dissolves heavy build-up of grease, tar, asphalt, oil, residue and waxes on motor blocks, chassis and oil engines. Ideal for pre-soak before steam cleaning.

LONG STAYING POWER
Oran-Gel’s gel-like formula clings to surfaces, allowing longer contact time. The formula has a pleasant citrus smell and is water-rinsable for extra convenience and safety.

ENVIRONMENTALLY PREFERRED
Oran-Gel is “Nature’s own cleaning agent.” Citrus oil gives this product its degreasing power. ORAN-GEL contains no petroleum distillates and no chlorinated solvents and is completely biodegradable.

Directions for Use

Add COOL (not hot or warm) water to Oran-Gel®. Do not add Oran-Gel to water. Add HALF the required water and shake or stir well. Add the other half of the water and shake or stir again. Spray from a compression sprayer or, for small areas, from a Trigger Sprayer. Dilute 1:20 with cool water. Spray engine surface and allow approximately 15 minutes for the gel to work. Rinse with water. (High pressure flush will help remove residue.) For extreme soil, scrub surface with a stiff bristle brush and then rinse. When temperature is below 40°F, allow 1-3 hours of gel contact time. Spray Oran-Gel on a warm (not hot) engine. Do not spray while engine is running. As a Soak Degreaser, immerse engine parts to be cleaned in the solution until grease is loosened. Rinse thoroughly. NOTE: Powerful organic compound and may harm some plastic or painted surfaces. Test first before applying. Avoid food contamination during storage and use. For use on non-food contact surfaces only.