Exist
 

Space Jam™ - Case of 12 aerosols

Expanding Foam Sealant
Item #121426-12

Space Jam™ - Case of 12 aerosols

Expanding Foam Sealant
Item #121426-12

Need Assistance? Call us 833-699-7864

  • Expands to economically fill and seal large gaps and cracks
  • Insulation Rating of R5 per inch, flame retardant
  • Can be used indoors and outdoors

Product Description

Space Jam™ contains one component moisture-cure polyurethane insulating foam that expands 2-3 times dispensed volume. Space Jam forms an airtight barrier that provides superior insulation (R5/inch) and is water and weather resistant. When cured, it is weather and rot proof and can be sanded, painted, or stained if necessary.

QUICK
Space Jam dries to touch in 15-30 minutes and fully cures in 24 hours. With its pin-point tube application tube, Space Jam is easy to get into the gaps and cracks you want it in. Each can provides 800 lineal feet of 3/8” bead.

APPLICATIONS
Space Jam is ideal for sealing wherever you need to control air leakage to prevent energy loss. Use around air vents, attics, baseboards, cable entries, windows, walls and more. Helps to keep rodents out as well.

Directions for Use

This product is extremely flammable during dispensing. Read cautions carefully. Optimum temperature for use is between 65-80°F (18-27°C). Clean dust, grease and oil off surfaces to be foamed. Cover surrounding surfaces. 1. Wear protective glasses or goggles, nitrile gloves and clothing that protects against dermal exposure. Use only in a well ventilated area. 2. Shake well. Screw nozzle adapter onto valve stem, being careful not to activate valve. With valve end of can down, slowly press trigger to dispense foam. Test on experimental surface. 3. Fill cavity only 1/3 full with foam to allow for expansion. For cavities greater than 3 in. (75 mm) diameter, moisten substrate before applying. 4. Dries tack-free in approximately 5 minutes, cuttable within 1 hour, cures in 12-24 hours. Do not disturb uncured foam. 5. Cured foam must be removed mechanically. 6. Cured foam can be trimmed or sanded. Cured foam exposed to sunlight must be covered with paint or stain. 7. Store upright in a dry area. Leave nozzle on can. To reuse, cut 1 in. (3 cm) off nozzle tip. 8. Use remainder of can within 30 days.

Product Downloads & SDS

Need Assistance? Call us 833-699-7864

State is an Extension of Your Team

Our customers of all sizes benefit from the best facility management products.

Team
Customized Solutions
Team
Professional Service
Team
Proven Results